IRO Flex Joint – Universal, Large

IRO Flex Joint – Universal, Large

IRO wants to be your source for builder parts. Our universal flex joint is the best solution for your control arm build where maximum misalignment is required to achieve unrestricted articulation in your suspension. These precision machined parts come unassembled, so you can weld them in any position required.

PRODUCT FEATURES AND BENEFITS

2 5/8″ O.D. AND 2 5/8″ MOUNTING WIDTH – Bolts directly into most Jeep lower control arm mounts
9/16″ BOLT HOLE – Also fits factory 14mm lower control arm bolts
OUTER BODY IS 1/4″ WALL THICKNESS – Significantly thicker than our competitors. This feature gives you superior strength in the same size joint
40° TOTAL MISALIGNMENT – Far more than most other competitor’s joints. We haven’t found one with more articulation yet.
UHMW BEARING RACES – The choice we made to use this material was simple. Here is the wikipedia definition so you know why: Ultra-high-molecular-weight polyethylene (UHMWPE or sometimes shortened to UHMW), also known as high-modulus polyethylene (HMPE) or high-performance polyethylene (HPPE), is a subset of the thermoplastic polyethylene. It has extremely long chains, with molecular weight numbering in the millions, usually between 2 and 6 million. The longer chain serves to transfer load more effectively to the polymer backbone by strengthening intermolecular interactions. This results in a very tough material, with the highest impact strength of any thermoplastic presently made. It is highly resistant to corrosive chemicals, with exception of oxidizing acids. It has extremely low moisture absorption, has a very low coefficient of friction, is self-lubricating, and is highly resistant to abrasion (15 times more resistant to abrasion than carbon steel). Its coefficient of friction is significantly lower than that of nylon and acetal, and is comparable to that of Teflon, but UHMWPE has better abrasion resistance than Teflon. It is odorless, tasteless, and nontoxic.
GREASABLE – Incredibly long lasting
NO SNAP RINGS – This joint bolts together without the use of snap rings or threaded jam nuts.
NO SPECIAL TOOLS REQUIRED – No spanner wrench or custom tool is needed to assemble or maintain these joints
INCREDIBLE STRENGTH – Easily withstands the high axial loads of A-Arm and other triangulated link suspensions.
FULLY REBUILDABLE – Simple and inexpensive to rebuild. This is the last joint you’ll ever have to buy.

Comments

IRO Flex Joint – Universal, Large:

Item Price: $39.99

Item Tags:

Iron Rock Offroad

Share This Item:

Featured Products

Lower Quarter Pane...

Protect your Jeeps lower quarter panels from rocks and other trail carnage, all while adding a stylish look. Made from 3/16″ CNC cut steel plate and press formed to shape, Made in USA for the highest quality. Comes with ether allen Button head bolts or Counter-sunk bolts, installs using Rivit Nuts using the included tool so interior panels do not need to be removed to install. Woks with 97+ Cherokees with standard flair, compatible with 96- Cherokees by trimming the fender flair. Ships bare steel ready to paint.
XJ Switch Panel an...

Looking for the perfect spot to mount your switches for auxiliary lighting and other accessories? Our new bolt on switch panel / gauge pod replaces your factory ash tray and allows for a single 2″ round gauge and 6 switches. Made from CNC Plasma cut .050 Aluminum. Includes 6 rocker style switches. Requires removal of two rivets on the latch plate.
DIY Mojave Rear Bu...

Our all new Mojave series Jeep Cherokee XJ Cut and Fold rear bumper is completely redesigned from the ground up. We start our new design using a sheet of tough 3/16 steel from the finest steel mills in the U.S. With the hardcore off-roader in mind, we designed this bumper to have the best in class departure angle while providing stunning lines and flows nicely with the over all looks of the Jeep Cherokee. Now available for the first time in a weld yourself kit! Each bumper is fully CNC Plasma Cut to ensure quality fitment each and every time, …
Mojave Cut & ...

Our all new Mojave series Jeep Cherokee XJ Cut and Fold rear bumper is completely redesigned from the ground up. We start our new design using a sheet of tough 3/16 steel from the finest steel mills in the U.S. With the hardcore off-roader in mind, we designed this bumper to have the best in class departure angle while providing stunning lines and flows nicely with the over all looks of the Jeep Cherokee. Each bumper is fully CNC Plasma Cut to ensure quality fitment each and every time, and subsequently press formed in house for the best finish and …
XJ – Electric Fa...

Tired of the stock mechanical fan or worried about losing your radiator from the fan digging into it. Our electric fan conversion replaces the stock mechanical and electrical fan with three dual ball bearing 10″ electric fans, with an average combined CFM of 4,336 CFM. We tested our fans and this is real world CFM numbers: Average: 4,336.23 Min: 4,077 Max: 4,650 CNC Plasma Cut & Precision Bent Aluminum Shroud. Fully Compatible with Stock, 2 row and 3 row OEM and aftermarket radiators. We have tested in house with OEM, Aftermarket OEM, Champion, and CSF with no fitment issues. With …